High-performance-polymer specialist BIEGLO GmbH unveils an expanded materials line-up from Asia and USA. Most notable is the new strategic PEEK-alliance with PFLUON Advanced Materials. Other key products in the BIEGLO portfolio include Mitsui Chemicals’ Aurum® thermoplastic polyimide (TPI), NOWETM 201 wear grades, Celazole® PEEK-PBI compounds, Meldin® - thermosetting Polyimide from Saint-Gobain, recycled PEEK-grades, and Spartech’s Royalite® sheet and Korad® film.
Mechanical engineering remains BIEGLOs core market, while BIEGLO is continuously expanding into electrical and electronic engineering, aerospace, mobility, and defense sectors.
Product Highlights K-2025
New PEEK-Partnership: BIEGLO & PFLUON
BIEGLO has entered into a non-exclusive distribution agreement with Zhejiang PFLUON Technology Co., Ltd. The cooperation combines PFLUON’s expertise in PAEK-production and
development capacities with BIEGLO’s European distribution network, targeting the automotive, aerospace and industrial market segments.
Aurum® Thermoplastic Polyimide
Mitsui Chemicals’ Aurum® TPI offers the highest glass- transition temperature among melt-processable polymers: Tg 245 °C. Aurum is used in mechanical applications as bearings, thrust-washers and gears. Increasingly Aurum is ‘discovered’ as insulation material in electrical and electronic environments as high-voltage EV-coils, busbars, or as insulation layer for medical devices. Powder- and Extrusion-coating is possible with a 100% pure Polyimide.
NOWETM VC-201 (Aromatic thermosetting Copolyesters)
NOWETM VC-201 from ATSP Innovations combines aromatic thermosetting copolyesters with high thermal stability (decomposition > 450 °C), low dielectric constant, and excellent dimensional and creep resistance. In PTFE composites, it boosts temperature performance and significantly
enhances wear resistance for high-demand applications.
Celazole® PEEK-PBI Compounds
Celazole® T-Series blends PBIs 427 °C Tg with PEEK’s melt-processability, HDT is lifted to 320 °C, boosting modulus and wear life, and remaining 100 % PFAS-free. Grades from un-filled TU-60 to carbon-fibre-reinforced TF-60C support seals, bearings and semiconductor tooling operating beyond 300 °C.
Meldin® 7000 thermoset Polyimide Series
Meldin 7000 from Omniseal / Saint-Gobain operate continuously at 315 °C and withstand 482 °C excursions, keep dimensional change below 0.04 % after repeated cycling between 23 °C and 260 °C. Self- lubricating grades support dry-running applications under high thermal
and mechanical stress, meeting aerospace and military standards like MIL-P-46198 and AMS 3644E.
R-PEEK Dexnyl® R-PEEK Granules
BIEGLO closes the loop on post-industrial PEEK by collecting, cleaning and re-granulating residues into Dexnyl® R-PEEK 143G. Mechanical properties are retained after recycling, enabling cost-effective substitution of virgin PEEK in high-temp components while cutting the carbon-footprint. BIEGLO offers natural recycled PEEK grades in different viscosities and compounded recycled PEEK.
Spartech Sheet & Film Innovations
The portfolio of Spartech products was merged into BIEGLO
in 2025. ASP-Plastics GmbH was acquired by BIEGLO several years ago. ASP-Plastics was the official sales-channel in Europe from this large US
sheet-extruder.
PolycastTM cast acrylic is available as sheet, tube, and rod, with special grades for bullet-resistant windows. These offer UL-rated ballistic protection, over 90% light transmission, and optional SARTM coating for added abrasion resistance.
Royalite® flame-retardant PVC/ABS and PVC/Acrylic sheets meet UL, FAR 25.853 and ASTM E-84 FST requirements, offering lightweight, thermoformable solutions for aircraft interiors, battery housings and transport seating applications.
Korad® weatherable PMMA films laminate onto ABS, HIPS or PVC, delivering long-term UV stability, gloss control (10-85 %) and outdoor colour fidelity for recreational and building products.
www.bieglo.com
